Course: CCNP - Cisco Certified Network Professional (exams 300-101, 300-115 & 300-135)

As low as

$1,027.29 incl. vat

1 x Course: CCNP - Cisco Certified Network Professional (exams 300-101, 300-115 & 300-135)   +
$1,027.29 incl. vat

$1,027.29 incl. vat

duration: 125 hours |

Language: English (US) |

access duration: 180 days

With this CCNP Bundle training course you get an optimal preparation for the CCNP - Cisco Certified Network Professional certification. This bundle consists of training courses for the exams 300-101, 300-115 and 300-135. In this training you gain the knowledge and skills to install, configure and troubleshoot LAN and WAN networks.


After completing this bundle you will be optimally prepared for the CCNP Cisco Certified Network Professional certification. By following the three courses you will gain extensive knowledge through tutorials, knowledge tests, labs and simulations.


You are in possession of a valid CCNA or CCIE certification. You also have at least 1 years experience in managing Cisco-based networks.

Target audience

Network Administrator

CCNP Routing and Switching - ROUTE - Implementing Cisco IP Routing (exam 300-101)

68 hours

ROUTE 2.0: Introduction to Networking

Course_Description=<p>Explore the purpose of the CCNP Route 300-101 exam, how Cisco routers are used in medium to large networks, and some challenges a network engineer may experience when supporting a large network.</p> TargetAudience= Duration=01:02

ROUTE 2.0: IP Operations

Course_Description=<p>Explore the basics of the Internet Protocol. Discover how routers leverage IP to move data across a network by following each step of a packet's journey through multiple routers to its destination.</p> TargetAudience= Duration=00:57

ROUTE 2.0: TCP and UDP Operations

Course_Description=<p>Examine the differences between transmission control protocol (TCP) and user datagram protocol (UDP) operations </p> TargetAudience= Duration=00:57

ROUTE 2.0: Network Migration

Course_Description=<p>Explore how changing network parameters, routing, or protocols can have an adverse effect on a network.</p> TargetAudience= Duration=00:21

ROUTE 2.0: Point-to-Point Networking

Course_Description=<p>Discover the Point-to-Point Protocol (PPP) and how it is configured and can be used on a network.</p> TargetAudience= Duration=01:14

ROUTE 2.0: Frame Relay Operations

Course_Description=<p>Explore frame relay operations, including point-to-point and multipoint frame relay configuration, verification, and syntax.</p> TargetAudience= Duration=01:16

ROUTE 2.0: IPv4 Addressing Types

Course_Description=<p>Discover IPv4 subnetting and explore the different addressing types.</p> TargetAudience= Duration=00:50

ROUTE 2.0: IP Addressing and DHCP

Course_Description=<p>Discover the basics of the DHCP process and how to configure a DHCP server on a Cisco router. Configuring a DHCP relay agent is also covered.</p> TargetAudience= Duration=00:53

ROUTE 2.0: IPv6 Addressing

Course_Description=<p>Explore the basics of IPv6, including the structure of an IPv6 address and how to set up stateless address autoconfiguration.</p> TargetAudience= Duration=01:02

ROUTE 2.0: IPv6 Addressing and DHCP

Course_Description=<p>Explore scenarios where DHCPv6 is used in conjunction with stateless address autoconfiguration, and where DHCPv6 issues options and addresses without using stateless address autoconfiguration.</p> TargetAudience= Duration=00:33

ROUTE 2.0: Static Routing

Course_Description=<p>Explore the concept of static routing and how to configure static and floating static routing.</p> TargetAudience= Duration=00:54

ROUTE 2.0: Default Routes

Course_Description=<p>Explore the use of default routes, including how to configure them and verify their operation.</p> TargetAudience= Duration=00:28

ROUTE 2.0: Routing Protocol Types

Course_Description=<p>Explore routing protocol types, including interior and exterior gateway routing protocols.</p> TargetAudience= Duration=00:51

ROUTE 2.0: Administrative Distance and Passive Interfaces

Course_Description=<p>Examine network routing configuration using administrative distance and passive iInterfaces for the RIP, EIGRP, and OSPF routing protocols.</p> TargetAudience= Duration=00:59

ROUTE 2.0: Using VRF Lite

Course_Description=<p>Explore VRF Lite, including why you would use this technology and how to configure it and verify the configuration.</p> TargetAudience= Duration=00:56

ROUTE 2.0: Route Filtering

Course_Description=<p>Explore how to configure filtering for routes using distribute and prefix lists.</p> TargetAudience= Duration=00:56

ROUTE 2.0: Route Filtering for EIGRP, OSPF, and BGP

Course_Description=<p>Examine route filtering with the EIGRP, OSPF, and BGP routing protocols.</p> TargetAudience= Duration=00:22

ROUTE 2.0: Route Redistribution with RIP and EIGRP

Course_Description=<p>Explore route redistribution between networks running different routing protocols, in particular, RIP and EIGRP.</p> TargetAudience= Duration=00:58

ROUTE 2.0: Route Redistribution with OSPF

Course_Description=<p>Explore route redistribution between networks running different routing protocols with a network running OSPF.</p> TargetAudience= Duration=00:36

ROUTE 2.0: Router Summarization for RIP

Course_Description=<p>Explore route summarization and how it is used in a RIP-based system.</p> TargetAudience= Duration=00:34

ROUTE 2.0: Router Summarization for EIGRP and OSPF

Course_Description=<p>Examine route summarization and how to use it in an EIGRP and OSPF-based systems.</p> TargetAudience= Duration=00:55

ROUTE 2.0: Routing Policies

Course_Description=<p>Explore the creation of policy-based routes and examine rules to manage network routing.</p> TargetAudience= Duration=01:06

ROUTE 2.0: Loop Prevention Using Built-In Mechanisms

Course_Description=<p>Explore loop prevention and built-in mechanisms to help prevent them.</p> TargetAudience= Duration=00:32

ROUTE 2.0: Loop Prevention Using Route Tags and Maps

Course_Description=<p>Explore loop prevention using route tags and route maps while redistributing in OSPF.</p> TargetAudience= Duration=00:48

ROUTE 2.0: Routing Information Protocol

Course_Description=<p>Explore and configure the Routing Information Protocol for IPv4 and IPv6 networks and examine the differences between RIP and RIPv2.</p> TargetAudience= Duration=00:50

ROUTE 2.0: Introduction to EIGRP

Course_Description=<p>Explore the Enhanced Interior Gateway Routing Protocol (EIGRP) and the EIGRP packet types.</p> TargetAudience= Duration=00:53

ROUTE 2.0: EIGRP Neighbors

Course_Description=<p>Explain how to configure EIGRP Neighbors using static and dynamic discovery and how to manage bandwidth utilization to prevent saturating a slow link</p> TargetAudience= Duration=01:02

ROUTE 2.0: EIGRP Authentication

Course_Description=<p>Explore using key-chains, keys, and key rotation to secure updates and prevent routing updates that are not authenticated.</p> TargetAudience= Duration=00:22

ROUTE 2.0: EIGRP Stubs

Course_Description=<p>Explore stub routers and how they are used, and examine various EIGRP stub configuration options.</p> TargetAudience= Duration=01:02

ROUTE 2.0: EIGRP Load Balancing and Metrics

Course_Description=<p>Explore equal and unequal load balancing and how to adjust the metric values for routes with the Enhanced Interior Gateway Routing Protocol (RIGRP).</p> TargetAudience= Duration=00:52

ROUTE 2.0: EIGRP Over IPv6

Course_Description=<p>Explore and configure EIGRP over IPv6 and recognize where it is similar and different from running EIGRP over IPv4.</p> TargetAudience= Duration=00:32

ROUTE 2.0: OSPF Packet Types

Course_Description=<p>Explore the five packet types of the Open Shortest Path First (OSPF) protocol.</p> TargetAudience= Duration=00:34

ROUTE 2.0: OSPF Configuration

Course_Description=<p>Explore the basics of OSPF configuration, including how to enable it, advertising networks to OSPF, and troubleshooting. Configuring plain text and MD5 authentication is also covered.</p> TargetAudience= Duration=00:57

ROUTE 2.0: OSPF Network and LSA Types

Course_Description=<p>Discover how to manually define OSPF network types, allowing you to change how OSPF behaves. Link state advertisements and their purpose is also covered.</p> TargetAudience= Duration=01:01

ROUTE 2.0: OSPF Route Types

Course_Description=<p>Explore the various route types that OSPF uses in the Cisco IOS routing table, including intra-area and inter-area routes and the differences with how OSPF handles external routes redistributed into an autonomous system.</p> TargetAudience= Duration=00:29

ROUTE 2.0: OSPF Area Types

Course_Description=<p>Discover how backbone and standard areas function in OSPF and examine variations of standard area types including Stub, Totally Stubby, NSSA, and Totally NSSA.</p> TargetAudience= Duration=01:01

ROUTE 2.0: OSPF Virtual Links and Paths

Course_Description=<p>Explore the use of OSPF virtual links for overcoming network segregation and how OSPF chooses a path among multiple paths to a destination.</p> TargetAudience= Duration=01:03

ROUTE 2.0: OSPF IPv6 Routing

Course_Description=<p>Discover how to configure IPv6 for OSPFv3, including how to configure IPv6 on OSPF routers and verify it is operational.</p> TargetAudience= Duration=00:25

ROUTE 2.0: Border Gateway Protocol Introduction

Course_Description=<p>Discover the Border Gateway Protocol (BGP) and get an introduction to its configuration on Cisco devices</p> TargetAudience= Duration=01:02

ROUTE 2.0: BGP Loopback and Propagation

Course_Description=<p>Explore how to propagate, scale, use loopback addresses, and peer groups to add resiliency to BGP</p> TargetAudience= Duration=01:07

ROUTE 2.0: Multiprotocol BGP

Course_Description=<p>Explore multiprotocol BGP and use BGP address families to support IPv6 and exchange IPv6 routes.</p> TargetAudience= Duration=00:23

ROUTE 2.0: BGP Attributes

Course_Description=<p>Explain how BGP attributes are used for route selection and how to manipulate the attributes to set a preferred router.</p> TargetAudience= Duration=00:57

ROUTE 2.0: Generic Routing Encapsulation Tunnels

Course_Description=<p>Explore Generic Routing Encapsulation (GRE) Tunnels for transferring packets from one protocol within another and, how to secure the transfer of those packets.</p> TargetAudience= Duration=00:54

ROUTE 2.0: Dynamic Multipoint, Easy VPN, and Ipsec

Course_Description=<p>Explore VPNs and tunneling to provide network separation and path isolation.</p> TargetAudience= Duration=01:15

ROUTE 2.0: Authentication, Authorization, and Accounting

Course_Description=<p>Explore and configure authentication, authorization, and accounting on a Cisco router and how to offload AAA to a Radius server.</p> TargetAudience= Duration=00:29

ROUTE 2.0: Access Control

Course_Description=<p>Explore securing a Cisco devices ports, console, and management plane using access controls.</p> TargetAudience= Duration=00:49

ROUTE 2.0: Security Features

Course_Description=<p>Explore the standard and extended Access Control Lists and use Unicast Reverse Path Forwarding (uRPF) to block traffic.</p> TargetAudience= Duration=01:03

ROUTE 2.0: Device Management

Course_Description=<p>Explore multiple interfaces to manage a Cisco device including using SSH, the console, and HTTPS through a web browser.</p> TargetAudience= Duration=00:51


Course_Description=<p>Explore and configure the Simple Network Management Protocol (SNMP) version 2 and 3 and the Network Time Protocol (NTP).</p> TargetAudience= Duration=00:58

ROUTE 2.0: Logging and Debugging

Course_Description=<p>Discover Cisco logging configuration and explore the IOS debug command for debugging or troubleshooting issues.</p> TargetAudience= Duration=00:48

ROUTE 2.0: DHCP Server

Course_Description=<p>Explore the configuration of a Dynamic Host Configuration Protocol (DHCP) server on an IPv4 and IPv6 network.</p> TargetAudience= Duration=00:49

ROUTE 2.0: DHCP IPv6 Stateless Server

Course_Description=<p>Discover and configure an IPv6 DHCP stateless server.</p> TargetAudience= Duration=00:24

ROUTE 2.0: Network Address Translation

Course_Description=<p>Explore network address translation (NAT) on both IPv4 and IPv6 networks.</p> TargetAudience= Duration=01:02

ROUTE 2.0: SLAs and Object Tracking

Course_Description=<p>Discover how service level agreements and tracking objects can be used to monitor a router and down-stream routers.</p> TargetAudience= Duration=01:00

ROUTE 2.0: NetFlow

Course_Description=<p>Explore router data and statistics using Cisco NetFlow.</p> TargetAudience= Duration=00:27

CCNP Routing and Switching - SWITCH - Implementing Cisco IP Switched Networks (exam 300-115)

25 hours

SWITCH 2.0 : Switch Overview and Administartion

Course_Description=<p>Explore Cisco switch configuration including how to manage the Ternary Content-Addressable Memory (TCAM) and handle switchport faults.</p> TargetAudience= Duration=00:58

SWITCH 2.0 : Layer 2 Network Discovery

Course_Description=<p>Explore networks using the Cisco Discovery Protocol (CDP), Link Layer Discovery Protocol (LLDP), and Unidirectional Link Detection (UDLD) Layer 2 protocols.</p> TargetAudience= Duration=00:30

SWITCH 2.0 : Virtual LANs

Course_Description=<p>Explore Virtual LANs and describe the different types of VLANs that can be used on a Network.</p> TargetAudience= Duration=01:05

SWITCH 2.0 : Trunking Using DTP, Dot1Q, &amp; ISL

Course_Description=<p>Explore dynamic and manual trunking using the DTP, dot1q, and ISL protocols.</p> TargetAudience= Duration=01:02

Cisco SWITCH 2.0: Trunking Using VTP

Course_Description=<p>Trunk links provide VLAN identification for frames traveling between switches. Explore the concept of trunking using the VLAN Trunking Protocol (VTP).</p> TargetAudience= Duration=00:56

SWITCH 2.0 : VLAN Trunk Protocol Pruning

Course_Description=<p>Explore how to leverage VTP pruning to eliminate unnecessary multicasts and broadcasts, optimizing VLAN traffic and maximizing bandwidth.</p> TargetAudience= Duration=00:51

SWITCH 2.0 : EtherChannel

Course_Description=<p>Explore EtherChannel and link aggregation including the Port Aggregation Protocol (PAgP) and the Link Aggregation Control Protocol (LACP).</p> TargetAudience= Duration=01:04

SWITCH 2.0 : Spanning Tree and Per VLAN Spanning Tree

Course_Description=<p>Discover the Spanning Tree Protocols and how they can be used to prevent network loops.</p> TargetAudience= Duration=00:54

SWITCH 2.0 : STP Timers and Failover

Course_Description=<p>Explore STP timer configuration to manage failovers and compare STP and the IEEE standard.</p> TargetAudience= Duration=00:33

SWITCH 2.0 : Rapid and Multiple Spanning Tree

Course_Description=<p>Explore, and configure, the Rapid Spanning Tree Protocol and Multiple Spanning Tree Protocol on a Cisco Catalyst switch.</p> TargetAudience= Duration=00:49

SWITCH 2.0 : STP Enhancements

Course_Description=<p>Discover the Cisco enhancements like PortFast, BPDUguard, Loopguard, and Rootguard which can enhance and protect the Layer 2 STP from attacks.</p> TargetAudience= Duration=00:52

SWITCH 2.0 : SPAN, RSPAN, and StackWise Clustering

Course_Description=<p>Explore the use of the Switch Port Analyzer, how to configure port mirroring using SPAN, and monitoring ports across multiple switches using RSPAN. Discover Cisco StackWise, its advantage and benefits, and how to configure it.</p> TargetAudience= Duration=00:52

SWITCH 2.0 : L2 Attacks and Port Security

Course_Description=<p>Explore Layer 2 attacks, security best practices, and how to identify some common Layer 2 attacks. Examine port security on a Cisco switch, how to configure it, and how to verify the configuration.</p> TargetAudience= Duration=00:46

SWITCH 2.0 : DHCP Snooping, IPSG, and DAI

Course_Description=<p>Discover how to mitigate DHCP spoofing and flooding attacks and use DHCP snooping to exclude ports from sending DHCP offers. Explore IPSG (IP spoofing) and DAI (ARP spoofing) and how they are configured in conjunction with DHCP.</p> TargetAudience= Duration=01:00

SWITCH 2.0 : VLAN ACLs and Private VLANs

Course_Description=<p>Explore the use of VLAN ACLs on a Cisco switch, how it helps to filter traffic within a single VLAN, and configuring port ACLs. Examine private VLAN usage and terminology, and how to configure a switch to use with private VLANs.</p> TargetAudience= Duration=00:56

SWITCH 2.0 : Storm Control and Port-Based Authentication

Course_Description=<p>Explore the use of Storm Control on a Cisco switch, the Layer 2 threat it prevents, and how to configure and verify it. Discover port-based authentication, including its requirements, usage, and configuration.</p> TargetAudience= Duration=00:47

SWITCH 2.0 : Layer 3 Switching

Course_Description=<p>Explore how Layer 3 routing functionality can be used on a Cisco Catalyst switch, the limitations of Layer 3 switching, how to perform a basic inter-VLAN routing configuration, and how to implement a dynamic routing protocol on switches. </p> TargetAudience= Duration=00:48

SWITCH 2.0 : Hot Standby Router Protocol

Course_Description=<p>Discover the Hot Standby Router Protocol, and how to implement a basic HSRP configuration, use tracking objects to trigger an HSRP failover event, configure tracking for a default route, and simulate an upstream router failure.</p> TargetAudience= Duration=00:55


Course_Description=<p>Explore the Virtual Router Redundancy Protocol and the Gateway Load Balancing Protocol, the differences between these protocols and other redundancy protocols, and how they are configured.</p> TargetAudience= Duration=00:46

CCNP Routing and Switching - TSHOOT - Troubleshooting and Maintaining Cisco IP Networks (exam 300-135)

33 hours

TSHOOT 2.0 : Troubleshooting &amp; Manipulating Output

Course_Description=<p>Explore the Troubleshooting and Maintaining Cisco IP Networks (300-135 TSHOOT) exam and introduce a methodology for troubleshooting.</p> TargetAudience= Duration=01:01

TSHOOT 2.0 : Logging &amp; Path Verification

Course_Description=<p>Explore the Cisco debug command to view router and switch debug info and use command line tools to verify the path that traffic is taking over the network.</p> TargetAudience= Duration=00:53

TSHOOT 2.0 : Response Automation &amp; Backups

Course_Description=<p>Explore how to use Cisco's Embedded Event Manager to send out notification emails based on router or switch configuration changes and examine available IOS tools used to back up router settings and information.</p> TargetAudience= Duration=00:57

TSHOOT 2.0 : Network Traffic Viewing, Reporting, &amp; Monitoring

Course_Description=<p>Examine methods for viewing the actual network payload moving through a router or switch and explore some of the reporting tools built into Cisco IOS.</p> TargetAudience= Duration=00:55

TSHOOT 2.0 : Troubleshooting Basics

Course_Description=<p>Increase your knowledge of Cisco troubleshooting by exploring techniques and steps involved in general troubleshooting, including establishing scope, determining what to look for, and actually resolving issues. </p> TargetAudience= Duration=00:32

TSHOOT 2.0 : Layer 2 Troubleshooting Part 1

Course_Description=<p>Explore the process of troubleshooting Cisco Layer 2 connectivity issues based on a provided network diagram and scenario.</p> TargetAudience= Duration=00:54

TSHOOT 2.0 : Layer 2 Troubleshooting Part 2

Course_Description=<p>Further enhance your Layer 2 troubleshooting knowledge by diagnosing issues and applying corrective action based on a given scenario.</p> TargetAudience= Duration=00:57

TSHOOT 2.0 : Layer 2 Troubleshooting Part 3

Course_Description=<p>Troubleshooting is a crucial skill for Cisco network administration. Explore various tools and strategies for correcting common Cisco Layer 2 issues.</p> TargetAudience= Duration=00:49

TSHOOT 2.0 : EtherChannel &amp; Spanning Tree Troubleshooting

Course_Description=<p>Discover the tools, processes, and strategies involved in troubleshooting EtherChannel and Spanning Tree.</p> TargetAudience= Duration=01:01

TSHOOT 2.0 : HSRP Troubleshooting

Course_Description=<p>Explore the process of troubleshooting common HSRP issues, including how to isolate an issue, formulate a troubleshooting plan, and implement the solution.</p> TargetAudience= Duration=01:08

TSHOOT 2.0 : VRRP Troubleshooting

Course_Description=<p>Explore VRRP troubleshooting in a situation where the incorrect cluster is active for a virtual address.</p> TargetAudience= Duration=00:17

TSHOOT 2.0 : Layer 3 Troubleshooting

Course_Description=<p>Discover tools and approaches that can be used to troubleshoot Layer 3 issues, including how to isolate the issue and strategies for correcting it.</p> TargetAudience= Duration=01:23

TSHOOT 2.0 : Routing Troubleshooting Part 1

Course_Description=<p>Discover how to identify and correct common Cisco routing issues.</p> TargetAudience= Duration=00:39

TSHOOT 2.0 : Routing Troubleshooting Part 2

Course_Description=<p>Discover additional methods to identify and correct common Cisco routing issues.</p> TargetAudience= Duration=01:02

TSHOOT 2.0 : OSPF Troubleshooting Part 1

Course_Description=<p>Discover how to identify and correct Open Shortest Path First (OSPF) protocol networking issues.</p> TargetAudience= Duration=00:53

TSHOOT 2.0 : OSPF Troubleshooting Part 2

Course_Description=<p>Explore additional methods to identify and correct Open Shortest Path First (OSPF) protocol networking issues.</p> TargetAudience= Duration=00:59

TSHOOT 2.0 : OSPF Troubleshooting Part 3

Course_Description=<p>Explore additional OSPF troubleshooting scenarios and discover how to diagnose and solve reported issues.</p> TargetAudience= Duration=00:44

TSHOOT 2.0 : EIGRP Troubleshooting Part 1

Course_Description=<p>Discover tools and approaches that can be used to troubleshoot Enhanced Interior Gateway Routing Protocol (EIGRP) issues, including how to isolate issues and strategies for correcting it.</p> TargetAudience= Duration=00:58

TSHOOT 2.0 : EIGRP Troubleshooting Part 2

Course_Description=<p>Discover additional tools and approaches that can be used to troubleshoot Enhanced Interior Gateway Routing Protocol (EIGRP) issues, including how to troubleshoot routes and routing tables.</p> TargetAudience= Duration=00:56

TSHOOT 2.0 : EIGRP Troubleshooting Part 3

Course_Description=<p>Discover additional approaches that can be used to troubleshoot Enhanced Interior Gateway Routing Protocol (EIGRP) issues, including how to troubleshoot configuration and IPv6 issues.</p> TargetAudience= Duration=01:12

TSHOOT 2.0 : BGP Troubleshooting Part 1

Course_Description=<p>Explore tools and approaches that can be used to troubleshoot Border Gateway Protocol (BGP) issues, including how to isolate issues and strategies for correcting it.</p> TargetAudience= Duration=01:05

TSHOOT 2.0 : BGP Troubleshooting Part 2

Course_Description=<p>Explore additional tools and approaches that can be used to troubleshoot Border Gateway Protocol (BGP) configuration issues.</p> TargetAudience= Duration=00:48

TSHOOT 2.0 : BGP IPv6 Troubleshooting

Course_Description=<p>Discover additional tools and approaches that can be used to troubleshoot Border Gateway Protocol (BGP) issues when dealing with IPv6.</p> TargetAudience= Duration=00:41

TSHOOT 2.0 : Miscellaneous Troubleshooting

Course_Description=<p>Explore additional troubleshooting situations that can cause network issues or failures.</p> TargetAudience= Duration=00:45

We offer several optional training products to enhance your learning experience. If you are planning to use our training course in preperation for an official exam then whe highly recommend using these optional training products to ensure an optimal learning experience. Sometimes there is only a practice exam or/and practice lab available.

Optional practice exam (trial exam)

To supplement this training course you may add a special practice exam. This practice exam comprises a number of trial exams which are very similar to the real exam, both in terms of form and content. This is the ultimate way to test whether you are ready for the exam. 

Optional practice lab

To supplement this training course you may add a special practice lab. You perform the tasks on real hardware and/or software applicable to your Lab. The labs are fully hosted in our cloud. The only thing you need to use our practice labs is a web browser. In the LiveLab environment you will find exercises which you can start immediatelyThe lab enviromentconsist of complete networks containing for example, clients, servers,etc. This is the ultimate way to gain extensive hands-on experience. 


Via ons opleidingsconcept bespaar je tot 80% op trainingen

Start met leren wanneer je wilt. Je bepaalt zelf het gewenste tempo

Spar met medecursisten en profileer je als autoriteit in je vakgebied.

Ontvang na succesvolle afronding van je cursus het officiële certificaat van

Krijg inzicht in uitgebreide voortgangsinformatie van jezelf of je medewerkers

Kennis opdoen met interactieve e-learning en uitgebreide praktijkopdrachten door gecertificeerde docenten


Once we have processed your order and payment, we will give you access to your courses. If you still have any questions about our ordering process, please refer to the button below.

frequently asked quesions

What is included?

Duration 125 hours
Language English (US)
Certificate of participation Yes
Online access 180 days
Monitor Progress Yes
Award Winning E-learning Yes
Examination possibleYes
Mobile ready Yes

Also included in world's #1 eLearning portal

Sharing knowledge Unlimited access to our IT professionals community
Study advice Our consultants are here for you to advice about your study career and options
Study materials Certified teachers with in depth knowledge about the subject.
Platform Access to our platform.
Service World's best service

Life Long Learning

Follow multiple courses? Read more about our Life Long Learning concept

read more

Contact us

Need training advise? Contact us!