Course: Cisco Certified Technician Routing & Switching RSTECH (Exam: 100-490)

$429.00
$519.09 incl. vat
ADD_TO_CART_INFO_FOR_BUSINESS

duration: 10 hours |

Language: English (US) |

access duration: 180 days |

In Onbeperkt Leren

Details

This Cisco Certified Technician Supporting Cisco Routing and Switching course focuses on the skills required to provide on-site support and maintenance of Cisco® routers, switches and control environments. This training will help you identify Cisco router and switch models, accessories, cabling and interfaces. You will also learn to understand Cisco Internetwork Operating System (Cisco IOS®) software and identify commonly used software. You will also be able to use the Cisco Command Line Interface (CLI) to connect and maintain products.

Topics covered:

  • Features of the OSI and TCP / IP models.
  • Network responsibilities, addressing and utilities.
  • Cisco Equipment, Components, & Port Characteristics.
  • Different SFP implementations.
  • Router and switch ethernet interfaces.
  • Find out where the Cisco IOS is stored.
  • Install hardware components in the Cisco device.
  • Replace hardware modules on a Cisco device.
  • Configure SSH on a Cisco device.
  • IOX-XE modes.
  • Tools available in Windows 10 that can help you troubleshoot network connectivity.
  • Perform factory reset on a Cisco IOS device.

Achieving Cisco Certified Technician (CCT) Routing and Switching certification is considered the best foundation for supporting other Cisco devices and systems

Result

After completing this training, you will have improved your knowledge and skills required for on-site support and maintenance of Cisco routers, switches and operating environments. In addition, you are optimally prepared for the CCT Routing & Switching RSTECH exam.

Prerequisites

No specific prior knowledge required.

Target audience

System Administrator, Network Administrator

Content

Cisco Certified Technician Routing & Switching RSTECH (Exam: 100-490)

10 hours

RSTECH: Networking Hardware, Models, & Technologies

Troubleshooting networking issues, be it as a technician in the field or in-house, involves identifying the offending hardware and applying the correct theoretical concepts. In this course, you'll learn to identify standard networking devices, systems, concepts, models, and technologies so you can solve client networking and connectivity issues regardless of physical location or setup.

You'll start by exploring the fundamental networking concepts and routing and switching devices outlined in the Cisco RSTECH exam. You'll expand on this to identify standard networking equipment by functionality.

Next, you'll investigate what comprises the vital networking models OSI and TCP/IP. You'll then classify Layer 1 and Layer 2 technologies, distinguishing cabling from standards. At the end of this course, you'll recognize typical connectivity issues and how to configure devices remotely.

This course can be used in preparation for the 100-490: Supporting Cisco Routing and Switching Network Devices (RSTECH) exam and to attain the Cisco Certified Technician (CTT) Routing & Switching certification.

RSTECH: Network Responsibilities, Addressing, & Utilities

Significantly reduced network performance or an unavailable network has severe consequences for a business's employees and end-users. Prompt and timely troubleshooting ensures that the knock-off effect of a faulty network is kept to a minimum.

To minimize this collateral damage, network technicians need to find out what the fault is, where it is, and how best to rectify it. In this course, you'll gain some of the core skills needed to efficiently and effectively diagnose, repair, and restore networking and system devices.

You'll start by investigating the purpose of service demarcation concepts and how to apply them. Next, you'll examine several network IP addressing protocols and their importance. Lastly, you'll delve into the frequently used standard networking utilities, like Telnet, SSH, TFTP, FTP, and PuTTY.

This course can be used in preparation for the 100-490: Supporting Cisco Routing and Switching Network Devices (RSTECH) exam and to attain the Cisco Certified Technician (CTT) Routing & Switching certification.

RSTECH: Cisco Equipment, Components, & Port Characteristics

Network field technicians need to look at a Cisco network and recognize what each device does, the physical characteristics of those devices, how they interact with other components on the network, and what to consider before troubleshooting them.

In this course, you'll nail down how to ID networking equipment by function alone and grasp its role in both the context of the operational network and in troubleshooting.

You'll start by categorizing network equipment by function before identifying how they operate in context and how they facilitate troubleshooting. You'll then examine how Cisco devices work with different networking media and the potential requirements for their use. Finally, you'll investigate the physical and functional characteristics of the ports on Cisco devices.

This course can be used in preparation for the 100-490: Supporting Cisco Routing and Switching Network Devices (RSTECH) exam and to attain the Cisco Certified Technician (CTT) Routing & Switching certification.

RSTECH: Cisco Memory Functions & Removing Cisco Devices

The complex expertise of field technicians involves knowing how to differentiating devices with the same functional nature by the diversity of that function. You need to be able to take that information and decide how to troubleshoot - keeping in mind all requirements before carrying out the resolution. In this course, you'll explore the memory-related characteristics of Cisco IOS devices and how to decipher what's involved in device replacement.

You'll start by examining how Cisco IOS devices use different types of memory. You'll then define how to troubleshoot these devices based on their memory type. Next, you'll review what's expected of a field technician. You'll end this course by outlining what you need to think about before device removal and replacement.

This course can be used in preparation for the 100-490: Supporting Cisco Routing and Switching Network Devices (RSTECH) exam and to attain the Cisco Certified Technician (CTT) Routing & Switching certification.

RSTECH: OS Types, IOS Access, & Terminal Emulation

When delving into a client's networking environment, a field technician needs to suss out each component and their interdependence as efficiently and accurately as possible. In this course, you'll build on your diagnostic skills by exploring Cisco OS types, some popular connection techniques, and two standard network protocols for remote device communication, access, and management.

You'll start by investigating the different Cisco OS types you're likely to encounter daily. You'll then learn how to distinguish them by their primary differentiators. Next, you'll examine how to connect to a Cisco IOS device directly and what's needed to access it. Finally, you'll learn how to use terminal emulation for Cisco IOS device access by employing the network protocols Telnet and SSH.

This course can be used in preparation for the 100-490: Supporting Cisco Routing and Switching Network Devices (RSTECH) exam and to attain the Cisco Certified Technician (CTT) Routing & Switching certification.

RSTECH: IOS Commands, Startup-Config, & IOX-XE Modes

To practice as a certified Cisco technician, not only do you need to identify problems and solutions theoretically, you also need to be able to implement troubleshooting techniques on Cisco devices. To do this, you need to be confident using the appropriate IOS commands to get a device to do what you want it to do.

In this course, you'll learn how to interact directly with the CLI of a Cisco IOS device by using standard commands and responding to specific prompts. In addition to this, you'll examine how to create, back up, and restore the startup-config of a device, recognizing why this is important for ensuring the device functions in the same way as the device it replaces. Finally, you'll learn to differentiate between the IOS-XE modes and how to identify them on an IOS-XE Cisco device.

This course can be used in preparation for the 100-490: Supporting Cisco Routing and Switching Network Devices (RSTECH) exam and to attain the Cisco Certified Technician (CTT) Routing & Switching certification.

RSTECH: Troubleshooting, Upgrading, Recovering, & Resetting

In order to take on the responsibility of troubleshooting and recovering Cisco devices, you need to be able to recognize a series of basic IOS troubleshooting commands. As a technician, you will also need to be familiar with using Windows tools to perform basic network troubleshooting tasks.

In this course, you'll learn the basic commands and tools available in Windows 10 that can help you troubleshoot network connectivity. Next, you'll explore the tasks and commands needed to upgrade the Cisco IOS. You'll examine how to perform password recovery on a Cisco device and explore additional miscellaneous tools that you may encounter when you need to troubleshoot or reconfingure a device. Finally, you'll learn how to perform a factory reset on a Cisco IOS device.

This course can be used in preparation for the 100-490: Supporting Cisco Routing and Switching Network Devices (RSTECH) exam and to attain the Cisco Certified Technician (CTT) Routing & Switching certification.

Course options

We offer several optional training products to enhance your learning experience. If you are planning to use our training course in preperation for an official exam then whe highly recommend using these optional training products to ensure an optimal learning experience. Sometimes there is only a practice exam or/and practice lab available.

Optional practice exam (trial exam)

To supplement this training course you may add a special practice exam. This practice exam comprises a number of trial exams which are very similar to the real exam, both in terms of form and content. This is the ultimate way to test whether you are ready for the exam. 

Optional practice lab

To supplement this training course you may add a special practice lab. You perform the tasks on real hardware and/or software applicable to your Lab. The labs are fully hosted in our cloud. The only thing you need to use our practice labs is a web browser. In the LiveLab environment you will find exercises which you can start immediatelyThe lab enviromentconsist of complete networks containing for example, clients, servers,etc. This is the ultimate way to gain extensive hands-on experience. 

WHY_ICTTRAININGEN

Via ons opleidingsconcept bespaar je tot 80% op trainingen

Start met leren wanneer je wilt. Je bepaalt zelf het gewenste tempo

Spar met medecursisten en profileer je als autoriteit in je vakgebied.

Ontvang na succesvolle afronding van je cursus het officiële certificaat van deelname van Icttrainingen.nl

Krijg inzicht in uitgebreide voortgangsinformatie van jezelf of je medewerkers

Kennis opdoen met interactieve e-learning en uitgebreide praktijkopdrachten door gecertificeerde docenten

Orderproces

Once we have processed your order and payment, we will give you access to your courses. If you still have any questions about our ordering process, please refer to the button below.

read more about the order process

What is included?

Certificate of participation Yes
Monitor Progress Yes
Award Winning E-learning Yes
Mobile ready Yes
Sharing knowledge Unlimited access to our IT professionals community
Study advice Our consultants are here for you to advice about your study career and options
Study materials Certified teachers with in depth knowledge about the subject.
Service World's best service

Platform

Na bestelling van je training krijg je toegang tot ons innovatieve leerplatform. Hier vind je al je gekochte (of gevolgde) trainingen, kan je eventueel cursisten aanmaken en krijg je toegang tot uitgebreide voortgangsinformatie.

Life Long Learning

Follow multiple courses? Read more about our Life Long Learning concept

read more

Contact us

Need training advise? Contact us!


contact